home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Supervisor's Toolkit
/
Network Supervisor's Toolkit.iso
/
patches
/
_21xptch
/
mirrem
/
readme.txt
next >
Wrap
Text File
|
1996-07-10
|
5KB
|
100 lines
This README file accompanies ZAPOBJ for SFT NetWare v2.15c. The following
files are included for this patch:
SFT FIX 2462 04-11-90 8:00a (for 3.5" media)
SFT_1 FIX 1178 04-11-90 12:34p (for 5.25" media)
SFT_2 FIX 620 04-11-90 12:34p (for 5.25" media)
TTS FIX 1572 05-15-90 2:44p (for 3.5" media)
TTS_1 FIX 1178 05-15-90 2:39p (for 5.25" media)
TTS_2 FIX 786 05-15-90 12:03p (for 5.25" media)
ZAPOBJ EXE 18816 05-16-90 3:09p
ZAPOBJ allows a removable read/write drive to be added to a system with existing
mirrored or duplexed drives. ZAPOBJ.EXE is run against a .OBJ file using a .FIX
parameter file. Parameter files containing temporary fixes (ie. *.FIX) are
supplied for both 3.5" and 5.25" media.
To implement ZAPOBJ:
1) Copy the files included with this patch to a working directory.
2) For a 3.5" media system, do the following:
a) Copy SFT.OBJ to the working directory from the SFTOBJ subdirectory
of your INSTALL diskette or hard drive directory.
b) Copy TTS.OBJ to the working directory from the TTSOBJ subdirectory
of your INSTALL diskette or hard drive directory.
CAUTION: It is strongly recommended that you make backup copies of
all .OBJ files to be patched in this process.
c) Execute the following commands:
ZAPOBJ SFT.OBJ NEWSFT.OBJ SFT.FIX
ZAPOBJ TTS.OBJ NEWTTS.OBJ TTS.FIX
If ZAPOBJ is successful, a message will be issued to that effect.
d) Copy NEWSFT.OBJ and NEWTTS.OBJ to the corresponding SFTOBJ and TTSOBJ
subdirectories under INSTALL. Rename them to SFT.OBJ and TTS.OBJ
respectively.
OR For a 5.25" media system, do the following:
a) Copy SFT_1.OBJ to the working directory from the SFTOBJ subdirectory
of your INSTALL diskette or hard drive directory.
b) Copy TTS_1.OBJ to the working directory from the TTSOBJ subdirectory
of your INSTALL diskette or hard drive directory.
c) Copy SFT_2.OBJ and TTS_2.OBJ to the working directory from the OSOBJ
subdirectory of your INSTALL diskette or hard drive directory.
CAUTION: It is strongly recommended that you make backup copies of
all .OBJ files to be patched in this process.
d) Execute the following commands:
ZAPOBJ SFT_1.OBJ NEWSFT_1.OBJ SFT_1.FIX
ZAPOBJ TTS_1.OBJ NEWTTS_1.OBJ TTS_1.FIX
ZAPOBJ SFT_2.OBJ NEWSFT_2.OBJ SFT_2.FIX
ZAPOBJ TTS_2.OBJ NEWTTS_2.OBJ TTS_2.FIX
If ZAPOBJ is successful, a message will be issued to that effect.
e) Copy NEWSFT_1.OBJ and NEWTTS_1.OBJ to the corresponding SFTOBJ and
TTSOBJ subdirectories under INSTALL. Rename them to SFT_1.OBJ and
TTS_1.OBJ respectively.
f) Copy NEWSFT_2.OBJ and NEWTTS_2.OBJ to the OSOBJ subdirectory under
INSTALL. Rename them to SFT_2.OBJ and TTS_2.OBJ respectively.
3) Execute NETGEN and ensure that the "Link/Configure NetWare Operating
System" option is selected and that NET$OS.EXE is copied to your network
drive during "NetWare Installation".
4) Boot the server. The system will indicate that the fix has been applied
by displaying the message "Netware Release for PTF00001".
CAUTION: Implement this fix on a low-use or non-production server before
implementing it on all SFT NetWare v2.15c servers in your installation.
*******************************************************************************
DISCLAIMER
Novell, Inc. makes no representations or warranties with respect to this
software patch, and specifically disclaims any express or implied warranties
of merchantability or fitness for a particular purpose.
Novell's intentions for this software patch is to provide a temporary
work-around to the anomalies described in this file. Such work-arounds are
typically addressed in future releases of NetWare.
Novell will not be responsible for any data loss that may result from
implementing this patch. Novell strongly recommends a backup be made before
any patch is applied. Technical support for this patch is provided at the
discretion of Novell.
*******************************************************************************